After the car has been used for a certain period of time, it is inevitable that it needs to be overhauled. So what materials are used in car engine repairs? Here is the car engine repair Materials needed:

Car overhaul is to overhaul the engine, change the piston, change the tile, bore the cylinder, and grind the shaft. Most of you should know this.

What needs to be replaced depends on the degree of damage.

Mechanical part: overhaul kit, one set of valve intake and exhaust, one set of piston rings, one set of 4 cylinder liners (if it is a 4-cylinder engine), two thrust pieces and 4 pistons.

Cooling system part: water pump (the pump blade is corroded or the water seal has water seepage), the upper and lower water pipes of the engine, the large circulating iron water pipe, the small circulating rubber pipe, the throttle water pipe (it must be replaced if it is aging and swollen).

Fuel part: fuel injector upper and lower oil ring, gasoline filter.

Incineration part: if the high-voltage line is swollen or if there is leakage, replace it, and fire the piston.

Intake part: air filter.

Other excipients are these: antifreeze, engine oil, engine oil grid, detergent, engine metal cleaner or all-purpose water.

Parts to be inspected: whether the cylinder head is corroded or uneven, crankshaft, camshaft, timing belt tensioner, timing belt adjustment pulley, timing belt, external engine belt and adjustment pulley, rocker arm or rocker arm shaft, if hydraulic The addition of tappets detects hydraulic tappets.

The overhaul kit includes cylinder gaskets and various oil seals, valve cover gaskets, valve oil seals, and gaskets.

The project is: overhauling the engine, processing the plane of the cylinder head, clearing the water tank, grinding the valve, inserting the cylinder liner, pressing the piston, cleaning the oil circuit, maintaining the motor, and maintaining the generator.