Years go by, seasons go by,

Say goodbye to yesterday, 2017 turned around and left.

Looking back on 2017, I have experienced so many things, as if I can vividly remember them.

Looking back on the past ten years, the footprints are firm and pure.

At the beginning of the years, Jinyan Laser continued the past and forged ahead to fill the domestic repair gap, and took on the arduous mission.

In the wind and rain, walking on the muddy road, I will think of the road of the explorer, and think of your firm footsteps in the wind and rain and the mud of the earth.

From ice and snow to spring green, from failure to success, Jinyan Laser has gone through ten spring, summer, autumn and winter.

In 2006, Jinyan Laser was born in Shenyang, an old industrial base in Northeast China.

---After 10 years, countless qualifications and honors----

--- Exciting, shocking moments: big stories ---

Based on nearly 40 years of maintenance experience and theoretical basis and combined with GE's production maintenance procedures, the company has established a maintenance system with independent intellectual property rights to provide customers with safety assurance.

——Laser strengthening of damping surface of FWP14 turbine blade in 2006,

——In 2007, the turboprop 6 was changed to 1 briquette-coking furnace tail gas power generation gas turbine decomposition, repair, commissioning and installation

——Repair of hot end components of GE 5000/6000/9000 units in 2008;

- 2009 GT25000 Ukrainian unit three-stage to six-stage nozzle blade repair;

——In 2010, 10A turbine blade wear-resistant tip preparation, Aπ-31Ф engine high-vortex blade tip crack repair;

——Repair of hot-end components of gas turbines of Mitsubishi Corporation in 2011;

——In 2012, the repair of Siemens gas turbine hot-end components and the composite strengthening treatment of the surface of the 093 nuclear reactor control main components;

——2013 Su-27, Su-30 aircraft landing gear repair, Su-27 titanium alloy flap frame crack welding repair;

——Repair of titanium alloy and high-strength steel flap slides in 2014;

——Ti in 2015 ₃ Al ring flame nozzle repair;

——In 2015, the company was rated as "Remanufacturing Pilot Unit in Liaoning Province" by the Ministry of Industry and Information Technology of the People's Republic of China

——Rated as a high-tech enterprise in 2016

——Become a demonstration unit of SME service platform in 2017

---You are always by your side in the time of struggle---

Professor Wang Maocai and academic friends visited our company

[gallery ids="3316"]

Our company went to Ghana, India to perform restoration tasks

Serious and dedicated Jinyan people are the cutest

In the days of struggle and laughter, there are you, me, and him.

Embrace the present, 2018 is coming quietly

today

Official Wechat sent a new calendar for 2018

Let's usher in a new wonderful time together

Ten years is another new starting point for an enterprise. Jinyan Laser will face future challenges more calmly and confidently, and further forge ahead and keep pace with the times.

Recalling the past, the prosperous years have lasted for decades; looking at the Ming Dynasty, it is better to work hard to govern.

Farewell to 2017 and look forward to 2018, we should not be satisfied with the existing success, but take this as a starting point, move towards new goals with full confidence and work together to create greater glories.

Counting easy spring and autumn, flourishing and flourishing; hard work, fruitful.

Yesterday is the history of today, live in the present, don't waste a minute and a second, let today be the pride of tomorrow.

Shining on the sun and moon for decades

2018, here we come. May Jinyan Laser have a better tomorrow, and write a moving new chapter again. Let us not forget our original intentions, and we will always be successful; let us forge ahead hand in hand and create greater glories.